Izdelki za oprema za embalažo (93)

Kuzey has been successfully producing and developing sheet extrusion lines for many years, aligning with the latest technological developments. These lines include mono-layer, co-extrusion, and multi-layer systems, all of which are compatible with PP, PS, and PET raw materials. Materials:PET, PS, PP Nominal width:1000 mm Sheet configuration:up to 5 layers

CAPACITY: Varies between 12 tons/hour and 20 tons/hour, depending on the product to be bagged and the desired tolerance. (It is guaranteed to work with a capacity of 15 tons/hour for flour or products of the same character, with an average error margin of +-50gr. per sack.) SET VALUE: set value can be programmed individually by the user. WEIGHT DISPLAY: The weight display screen has 4 digits. FAST - SLOW CYCLE: There are two programmable set values ​​in the system. And the filling kilos for these values ​​can be entered separately. The slow speed transition program adjustment is automatically determined and adapted by the system to provide the most precise and fastest weighing. Optimum speed adjustment is made automatically according to the weighed flour type and silo level. TOLERANCE: Upper or lower tolerances can be programmed individually. If the weighing result is outside these tolerances, flour is not loaded into the sack from the weighing bunker without

Silicon oil, silicon free ester and mineral oil based different sort of defoamers and antifoam used for wastewater treatment, automotive, textile, paint&coating, biogas production, paper and corrugated board, sugar processing, fermantation, oilfield

Shipments are prepared with appropriate packing, according to customer demands.

Roll, Sandwich Hamburger and similar sized products and Francala Bread are individually wrapped. Our machine has a servo motor system. Thanks to the touch screen and PLC on the machine, product package length, photocell adjustment and machine speed can be adjusted as desired. There is a sensor control system that prevents jamming of the product. If the product location is not correct, it stops the machine. All surfaces and covers that are in contact with the product in the machine are made of 304 quality chrome-nickel metal. Rotating jaw system. It packs 115 products per minute (roll, sandwich hamburger and similar products), and 83 products per minute in Francala Bread. It easy to use. MAX. POWER:3 Kw VOLTAGE:380 V MAX. CURRENT:25 A CONTROL:PLC-Touch Screen Compressor Air Requirement:5-6 Bar

Basic Data: Filling Volume: 800 ml Volume Brimful: 1000 ml Container Weight: 32 gr Lid Weight: 18 gr Product code:DPC800

Package Elevator It consists of a complete elevator to make it turnkey operational in the elevator shaft. Labor, assembly-installation, transportation and application project drawing for the municipality are not included. Reasons to Prefer Our Package Elevator Service Our expert staff offers the material to the service of our valued business partners by making a project suitable for the condition and intended use of the building. The elevator used in the correct package elevator selection shows high performance and provides efficiency suitable for the purpose.

Chanhing roll full automaticlly Total quantity and total meter reporting Stop auto. when paper core is finished Stop auto. when stretch film is finished OMRON PLC Control System OMRON 7" Touch Pané OMRON MAIN DRIVER MINDMAN PNUEMATIC SYSTEM • Machine Speed:: 1000 mt./min. Rewinding Time (300m)::$23 sec. - Roller Widht:: 600 mm • Main Motor:: 4 Kw • Paper Core Diameter:: 038-050-076mm Finished Roll Diameter (Max.):150mm Jumbo Weight:: 75 Kg (Max.) Paper Core Cup:: 100 Pcs(050) Machine Weight : 900Kg:Machine Dimensions: 1550x1550x1700 mm

Perché il best-seller dei bar non dovrebbe avere il suo sacchetto? I sacchetti per sandwich sono essenziali nei servizi da asporto e nelle paninerie, che vogliono presentare il loro piatto forte in modo pratico e accattivante. Solidità e Affidabilità: Realizzato in carta kraft ad alta resistenza, questo sacchetto offre una durata eccezionale, ideale per trasportare sandwich, baguette, pita, mauricette e panini senza rischi di strappi. Design Attraente: Con il suo aspetto naturale e il colore marrone kraft, questo sacchetto aggiunge un tocco artigianale ai vostri prodotti, migliorando la presentazione e attirando l’attenzione dei clienti. Versatilità: Sebbene progettato per i sandwich, questo sacchetto è molto versatile. Utilizzatelo per confezionare brioche o snack caldi e freddi, adattandosi a una vasta gamma di alimenti. Ottimizzazione dello Stoccaggio: Grazie al design compatto, il sacchetto kraft si ripone facilmente in cucina, rendendolo pratico per il settore alimentare.

Die Label Group ist seit mehr als 20 Jahren der Partner für Druck- und Verpackungslösungen vieler nationaler und internationaler Kundengruppen. Für weitere Details kontaktieren Sie uns bitte!

Moving through the centre, the product is transported to a horizontally positioned blade rotor. During rotation, the product is pushed against the wall of the machine and the eggs, if any, are destroyed inside the machine.

fournir

CMK 85/55-S4 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or multi compartment containers, hinged lid containers, leaking-proof containers, hole-punch containers, egg viyole, flower pots and seeding trays. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors Automatic lubrication of moveable parts which is activated as perthe specified time space Max. Sheet Width:930 mm Max. Sheet Thickness:0.2 mm /1.6 mm Max. Product Height:150mm +/-150mm Idle speed:80 cycles/min Total installed power:190 kW Power Consumption in Operation:60-65 kW Processing Air Pressure:8 bar Compressor Power:7m³/min Required Chiller Capacity:205m³ Machine Dimension:L 1300 x W 260 x H 280 cm machine weight:12.000 kg

CMK 95/65-S4 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, flower pots and seeding trays. Machine has the bigger forming area than 85 series station machine, and it is better if high is targeted. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors Max. Sheet Width:1030 mm Max. Sheet Thickness:0.2 mm /1.8 mm Max. Product Height:150mm +/-150mm Idle speed:80 cycles/min Total installed power:220 kW Power Consumption in Operation:70-80 kW Processing Air Pressure:8 bar Compressor Power:7m³/min Required Chiller Capacity:50.000 kcal/hr Machine Dimension:L 1500 x W 300 x H 280 cm machine weight:12.800 kg

CMK 95/65-S3 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, ete. Machine has the bigger forming area than 85 series station machine, and it is better if high capacity is targeted. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 15″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Convenient and fast mould change and pneumatic fixing Pneumatic control systems with servo motors Max. Sheet Width:930 mm Max. Sheet Thickness:0.2 mm /1.6 mm Max. Product Height:150mm +/-150mm Idle speed:80 cycles/min Total installed power:170 kW Power Consumption in Operation:50-55 kW Processing Air Pressure:8 bar Compressor Power:7m³/min Required Chiller Capacity:205m³ Machine Dimension:L 1300 x W 260 x H 280 cm machine weight:11.000 kg

4 Column cutting station 80mm diameter resistant shafts in each column Lower and upper independent servo motor station groups Cutting right – left and forward – reverse motorized adjustment system Max 780°C cutting blade temperature and insulation plate. Fast blade damping system Cutting group stroke lower/upper 750 mm Needle bearing system Piston upper group dearance system Compression force 60 tons

CMK 85/55-S3 Station Thermoforming Machine is eligible to form round and rectangular shape lids, plates and trays, single or mu iti compartment containers, hinged lid containers, leaking-proof containers, egg viyole, ete. Machine adopts the latest thermoforming technology itself and intelligent control. This model combines maximum speed and bulk production, high quality and efficiency, and low consumption in energy. lts mould is equipped to perform well with polymer plastics as well as biodegradable plastics. OTHER TECHNICAL SPECIFICATION AII units are fully automatic Movable touch control panel Screen size 75″ and colour Electricity panel assembled to the machine and cooling by AC Ethernet portal Possible to store different mould settings Max. Sheet Width:930 mm Max. Sheet Thickness:0.2 mm /1.6 mm Max. Product Height:150mm +/-150mm Idle speed:80 cycles/min Total installed power:170 kW Power Consumption in Operation:50-55 kW Processing Air Pressure:8 bar Compressor Power:7m³/min Required Chiller Capacity:205m³ Machine Dimension:L 1200 x W 260 x H 280 cm machine weight:11.000 kg

Synchronized forming and cutting by tilting movable lower platen to 80 degrees Sheet pitched by double toothed chains and move on abrasion resistant slide plates; Lengthened pan design allows to reach optimum forming heat without using pre-heater machine Upper and lower Mold ; heats control by indivudial Thermoregulation device Fine adjustment for mold by electric drive. Traversing and tilting moving system of mould PLC for control the line operation and supervise working parameters Opportunity to set one or more forming cycles without cutting by pneumatic drive High production capacity with resistant to high speed Strong and vibration free main body Double inlet- outlet system for fast cooling by increasing water discharge. Energy analyzer which gives amount of the electric consumption Cutting adjustment possible by digital meter ,controlled by PLC. Plug asist motor Forming Area:745 x 510 Max. cutting dimension (mm):725 x 480 Max. negative depth (mm):150 Max. sheet width (mm):750 Clamping force (kN):500 Upper heating, installed power (Kw):88 (full opt) Lower heating, installed power (Kw):72 (full opt) Dry cycles speed (cicles/1’):45 Processing air pressure (bar):8 Max. reel diameter (mm):1200 Total installed power (full opt – Kw):200 Lenght (mm):12.600 Width (mm):3.500 Height (mm):3.500

Synchronized forming and cutting by tilting movable lower platen to 85 degrees Sheet ; pitched by double toothed chains and move on abrasion resistant slide plates; Precise heater control for upper and lower pan. Upper and lower Mold ; heats control by indivudial Thermoregulation device Fine adjustment for mold by electric drive. PLC for control the line operation and to supervise working parameters Non-stop working capacity with easy maintain mechanical system. Safety system ensured by sensors such as sheet sagging , pressure drop,door ajar situations Water and Heat balance measure sensors for mold which can be control by PLC system Energy analyzer which gives amount of the electric consumption Cutting adjustment possible by digital meter ,controlled by PLC. Plug asist motor and plug speeds all controlling by PLC suitable to put variotions of movement to plugs to plugs,start slow go fast end slow etc Forming Area:710 x 480 Max. cutting dimension (mm):690 x 450 Max. negative depth (mm):150 Max. sheet width (mm):750 Clamping force (kN):250 Upper heating, installed power (Kw):83 (full opt) Lower heating, installed power (Kw):66 (full opt) Dry cycles speed (cicles/1’):33 Processing air pressure (bar):8 Max. reel diameter (mm):1200 Total installed power (full opt – Kw):190 Lenght (mm):11.300 Width (mm):3.500 Height (mm):3.400

Filling Volume: 1000 ml Volume Brimful: 1100 ml Container Weight: 32,50 gr Lid Weight: 18 gr Tamper Evidence: Yes Product code:DPC1000

Basic Data: Filling Volume: 400 ml Volume Brimful: 460 ml Container Weight: 16 gr Lid Weight: 4 gr Tamper Evidence: Yes Dimensions: Body External Diameter Top : 90 mm Lid External Diameter Top: 90,50 m Body External Diameter Bottom: 64 mm Body Height: 100,10 mm Lid Height: 5,50 mm Raw Material PP/Random Copolymer PP/Block Copolymer IML Decoration: Box: Yes Product code:DPC400

Volume: 160 ml Top Diameter: 95 mm Bottom Diameter: 65 mm Height: 36 mm Raw Material: PP Sealable: Yes Product code:DST1003

Roll Bread Packaging is done one by one. Thanks to the touch screen and PLC, there is easy access and intervention to the package size of the product, intelligent eye photocell adjustment and machine speed. Our Machine has intelligent motor system servo motor automation. There is a product control sensor that prevents the Roll Blower or other products from being jammed during packaging. During packing, the packaging does not crush the bread. If the location of the plant is not suitable, the intelligent eye sensor stops the machine. The machine is also made of 304 quality stainless chrome-nickel metal suitable for all surfaces that contact with the product and environmental protection covers. Our machine has been produced on the product in accordance with the operation of the device which outputs information such as date of production-serial number expiration date. This machine is optional. Emergency Stop has been put in place to provide user and machine security. CAPACITY MAX.:180 adet/dk. Machine width:1920 mm Machine length:3310 mm Machine height:1690 mm machine weight:800 Kg PACKAGE WIDTH:20 - 140 mm PACKAGE LENGTH:100- 250 mm PACKAGE HEIGHT:20 - 60 mm MAX. BOBBIN WIDTH:500 mm MAX. Cellophane COIL DIAMETER:350 mm INTERNAL DAMETER OF THE BOBİNE:3 max. power:3 Kw Voltage:380 V Max. current:25 A control:PLC-Touch Screen Compressor Air Requirement:5-6 Bar

4-column, servo-controlled station groups Needle bearing toggle system Cooling water flow control system Max stroke upper/lower 150 mm Lubrication system for each bearing Easy mould damping (with Locking System) Support piston upper and lower group Upper group spacing system (Positioning block parallelism) Ability to work with frame or press in upper and lower press Servo controlled seal system Compression force 60 tons

Volume: 280 ml Top Diameter: 86-86 mm Bottom Diameter: 71-71 mm Height: 61 mm Raw Material: PP Tamper Evident: Yes Product code:DST1017

Sandwich and hamburgers coming from the cooling tower or in bulk are placed manually between the product sorting slides with the help of two personnel. When the products are divided into groups, the numbers are checked with the sensors, and if there are missing rows, they wait until the order is completed The queues are divided into groups by the help of two flaps, and the number of packages depends on desired grouping (sandwich 4, 5, 6, Hamburger 4, 6, 8). Here, the products are placed between the product pushers of the packaging machine with the help of a push rod. Product pushers take products to the enveloping unit and allow them to be packaged. Our packaging machine is servo controlled. MAX. POWER:8 Kw VOLTAGE:380 V MAX. CURRENT:21 A CONTROL:PLC-Touch Screen Compressor Air Requirement:5-6 Bar

Volume: 175 ml Top Diameter: 68-68 mm Bottom Diameter: 54-54 mm Height: 67,8 mm Raw Material: PP Product code:DST1014

Sandwiches and burgers which are coming from the cooling unit are placed between the alignment units by two staff manually or automatically with unmanned feeding system. The aligned products are divided into groups of 4.5 and 6, thanks to two valves. The number of products is controlled by the sensors during the separation of the products and the control continues until it is finished. If desired; the slicing process takes place with the slicer system and the products reach the packaging for all grouped products. The products that reach the packaging are transferred to the relevant unit through the robot arm. The packaging unit is controlled by a single servo motor. MAX. POWER:4 Kw VOLTAGE:380 V MAX. CURRENT:25 A KONTROL:PLC-Touch Screen Compressor Air Requirement:5-6 Bar

Container Weight: 19 gr Lid Weight: 6 gr Tamper Evidence: Yes Dimensions: Body External Diameter Top : 108 mm Lid External Diameter Top: 106 mm Body External Diameter Bottom: 88,50 mm Product code:DPC350

Volume: 330 m Top Diameter: 116 mm Bottom Diameter: 67 mm Height: 52 m Raw Material: PP Sealable: Yes Product code:DST1007